Service · Photogrammetry
Your drone flights, turned into measurable maps
Send us the raw photos from your RGB or multispectral flights and get orthomosaics, elevation models and bands ready for the dashboard and for the inventory. From any country; no software or workstations to buy.
What you get
- Georeferenced RGB orthomosaic as a COG (cloud-optimized GeoTIFF)
- Digital elevation model (DEM) and, with a multispectral drone, the separate bands (red, green, blue, red edge, near infrared)
- Precomputed vigor indices (NDVI, NDRE and more) over every plot
- Everything visible on the web dashboard and in Argos from the field, and downloadable for your own GIS
What we need from you
- The raw drone photos (JPG and, if applicable, multispectral TIF), organized per flight
- 2 to 5 cm per pixel (typically 70 to 120 m altitude), 75 % front and 70 % side overlap
- The plot or orchard polygon, or a reference so we can draw it
- 20 to 200 GB per season depending on the area: we give you an upload link or a bucket of your own
How we work
You upload the imagery
Through an upload link or straight into your bucket. Ikkarus plans the flight if we fly; if you fly, we send the altitude and overlap guide.
We process
Photogrammetry on our servers, clipping per plot and fraction, and quality control of the georeferencing.
You receive the products
Orthomosaic, DEM and bands on the dashboard and downloadable. Counting and the rest of the analysis start from here.
Where it is switched on today Available for any crop and country: processing does not depend on the plant's biology. We fly drones ourselves only in Mexico; elsewhere we process your flights or your local provider's.
Frequently asked questions
Can I send an already processed orthomosaic instead of raw photos?
Yes. If you already have the orthomosaic we load it and go straight to the inventory. It only needs to be georeferenced and sharp enough to see every plant.
Which drones and cameras do you accept?
Any drone that writes GPS into the photos: DJI Mavic 3 Multispectral and Enterprise, Phantom 4, Matrice with RGB or multispectral cameras (MicaSense, Sentera). If in doubt, send us ten sample photos and we'll tell you.
How long does it take?
It depends on the area and the image size. A 50-hectare plot is usually ready one or two business days after the upload finishes; a campaign of several hundred hectares, in a week. We fix it in the proposal.
Quote this service with your own data
Tell us the area, the crop and which imagery you have. You get a concrete proposal within 48 business hours; and if you like, we first review your imagery and tell you what it can measure.
Or write to us at [email protected]